CD ripping guide

How to rip a CD to MP3

Make MP3 copies for older car stereos and music players that need them, while considering better-quality AAC options for modern devices.

Diagram showing an audio CD being ripped to high-quality MP3 files
The short answer

MP3 remains useful for backward compatibility with older car stereos and portable music players. For modern devices, prefer AAC, which typically delivers better audio quality than MP3 at comparable bitrates. xHE-AAC, the latest AAC generation, offers excellent perceptual quality and efficiency, particularly at lower bitrates, where supported. If MP3 is required, use high-quality encoder settings.

For new lossy music files, consider AAC first

AAC generally offers better coding efficiency than MP3 at comparable bitrates. The newer xHE-AAC codec provides excellent perceptual quality at constrained bitrates on compatible players. Choose MP3 when your playback equipment requires it. Compare the formats →

What to aim for

Choose 320 kbps or high-quality VBR; review CD extraction logs.

Step-by-step instructions

Best for older car stereos and music players that require MP3. The steps below use EZ CD Audio Converter and its integrated tools.

  1. Insert your CD

    Open Audio CD Ripper and select the audio CD drive.

  2. Find track names

    Download album and track metadata and review artwork.

  3. Select MP3

    Choose MP3 when an older player requires it. If the player supports AAC or xHE-AAC, consider those formats for more efficient lossy compression.

  4. Choose MP3 quality

    Use 320 kbps CBR for high bitrate, or high-quality VBR for a practical size and quality balance.

  5. Start ripping and inspect results

    Select your output folder, rip the disc and check the ripping log and track names.

Audio CD to MP3 ripping workflow illustration
Workflow illustration, not an application screenshot

Recommended settings

These are starting points, not universal requirements. If your playback device or editing workflow needs a different specification, use that specification instead.

Setting Recommendation
Older players MP3, 320 kbps CBR for broad backward compatibility
Preferred modern lossy format AAC for better coding efficiency and typically higher quality than MP3 at comparable bitrates
Latest AAC technology xHE-AAC for excellent quality, particularly at lower bitrates, on compatible devices
Efficient high quality High-quality VBR MP3
Sample rate Keep original 44.1 kHz for Audio CDs
Metadata Track number, title, artist, album and artwork

Important tips and common mistakes

Quality reminder

Converting an existing lossy source to another format cannot recover audio information that was already discarded. Always keep an original copy when the recordings matter.

  • Do not discard the master: If the CD matters, make a separate FLAC archive as well.
  • Use metadata before ripping: Good tags are easier to confirm while the physical disc is in the drive.
  • Avoid needless resampling: Leave the CD at its native 44.1 kHz unless a target device requires otherwise.

Frequently asked questions

Does 320 kbps MP3 equal CD quality?

No. MP3 is lossy, even at 320 kbps, although high-bitrate MP3 can sound very good.

Is VBR worse than CBR?

Not inherently. Quality-oriented VBR changes the bit rate as needed by the music.

Can I make AAC, xHE-AAC and MP3 copies from the same CD?

Yes. Rip a FLAC lossless master first, then convert it to AAC or xHE-AAC for supported players and MP3 for older hardware. This avoids repeatedly reading the disc.

Continue learning

These tutorials cover the next steps in building a music collection you can keep and use across devices.