Not Deleting trailing silence.

Music Converter | CD Ripper | Disc Burner
General discussion / Request help
Post Reply
User avatar
thexfile
Gold
Gold
Posts: 531
Joined: Wed Mar 07, 2007 3:52 am
Location: Head like a hole...
Contact:

Not Deleting trailing silence.

Post by thexfile » Sat Sep 09, 2023 8:05 pm

Not Deleting trailing silence, Digital silence (0-samples)

trailing.png
trailing.png (32.73 KiB) Viewed 758 times
User avatar
poiko
Site Admin
Site Admin
Posts: 4764
Joined: Sat Mar 11, 2006 8:31 pm
Location: https://www.poikosoft.com
Contact:

Re: Not Deleting trailing silence.

Post by poiko » Mon Sep 11, 2023 10:38 am

Delete Silence - Digital Silence will remove the zero-samples only. It seems like your tracks did not have any.

You can change to Silence Removal Threshold (-60 dB FS is default) to remove low amplitude silence.
timurbekow
New User
Posts: 1
Joined: Mon Sep 11, 2023 1:09 pm
Contact:

Re: Not Deleting trailing silence.

Post by timurbekow » Mon Sep 11, 2023 1:17 pm

Please tell me, what were the parameters for the silence removal threshold in previous versions? Both the maximum and minimum values. Silence removal varied in different updates, and I'd like to standardize my entire music collection.
Somewhere you mentioned that -70 is the default, in other responses -60, and on the 'DSP Options' page, it says -80. Please help me understand
Last edited by timurbekow on Mon Sep 11, 2023 1:19 pm, edited 1 time in total.
User avatar
poiko
Site Admin
Site Admin
Posts: 4764
Joined: Sat Mar 11, 2006 8:31 pm
Location: https://www.poikosoft.com
Contact:

Re: Not Deleting trailing silence.

Post by poiko » Mon Sep 11, 2023 3:49 pm

timurbekow wrote: Mon Sep 11, 2023 1:17 pm Please tell me, what were the parameters for the silence removal threshold in previous versions? Both the maximum and minimum values. Silence removal varied in different updates, and I'd like to standardize my entire music collection.
Somewhere you mentioned that -70 is the default, in other responses -60, and on the 'DSP Options' page, it says -80. Please help me understand
- Threshold was -70.0 dB FS prior v11.1
- New default is -60 dB FS

Threshold
Adjust the threshold value of the silence removal from -80 dB FS to -20 dB FS.

-80 dB FS being near to the digital silence (0.01 % of the 0 dB FS peak) and -20 dB FS (10 % of the 0 dB FS peak)
User avatar
thexfile
Gold
Gold
Posts: 531
Joined: Wed Mar 07, 2007 3:52 am
Location: Head like a hole...
Contact:

Re: Not Deleting trailing silence.

Post by thexfile » Wed Sep 13, 2023 4:25 pm

Ok, it's the opposite.

It works just fine. :mrgreen:
Post Reply