Page 1 of 1

Not Deleting trailing silence.

Posted: Sat Sep 09, 2023 8:05 pm
by thexfile
Not Deleting trailing silence, Digital silence (0-samples)

trailing.png
trailing.png (32.73 KiB) Viewed 794 times

Re: Not Deleting trailing silence.

Posted: Mon Sep 11, 2023 10:38 am
by poiko
Delete Silence - Digital Silence will remove the zero-samples only. It seems like your tracks did not have any.

You can change to Silence Removal Threshold (-60 dB FS is default) to remove low amplitude silence.

Re: Not Deleting trailing silence.

Posted: Mon Sep 11, 2023 1:17 pm
by timurbekow
Please tell me, what were the parameters for the silence removal threshold in previous versions? Both the maximum and minimum values. Silence removal varied in different updates, and I'd like to standardize my entire music collection.
Somewhere you mentioned that -70 is the default, in other responses -60, and on the 'DSP Options' page, it says -80. Please help me understand

Re: Not Deleting trailing silence.

Posted: Mon Sep 11, 2023 3:49 pm
by poiko
timurbekow wrote: Mon Sep 11, 2023 1:17 pm Please tell me, what were the parameters for the silence removal threshold in previous versions? Both the maximum and minimum values. Silence removal varied in different updates, and I'd like to standardize my entire music collection.
Somewhere you mentioned that -70 is the default, in other responses -60, and on the 'DSP Options' page, it says -80. Please help me understand
- Threshold was -70.0 dB FS prior v11.1
- New default is -60 dB FS

Threshold
Adjust the threshold value of the silence removal from -80 dB FS to -20 dB FS.

-80 dB FS being near to the digital silence (0.01 % of the 0 dB FS peak) and -20 dB FS (10 % of the 0 dB FS peak)

Re: Not Deleting trailing silence.

Posted: Wed Sep 13, 2023 4:25 pm
by thexfile
Ok, it's the opposite.

It works just fine. :mrgreen: